MANDATORY PASS/FAIL CRITERIA:

1. Bidder shall provide documentary evidence thatthey have minimum five (5) years of previous experience in provision ofcalibration and certification of precision instruments and systems usedfor custody transfer metering (fiscal metering) systems installed in Oil,Gas and Petrochemical Industry, as per the requirements of this RFP. Note:Joint Venture with other capable service providers who meet the aboverequirements is acceptable, and in case of JV, documentary evidence in aform of contract or MOU., etc. is to be provided with the bid. Documentaryevidence shall be provided to substantiate above requirement and biddershall submit required information as per Appendix “I”.
2. The Bidder organization shall have anaccredited Occupational Health and Safety Management System or alignedwith the requirements of ISO 45001-2018, OSHAS 18001 or a similarinternationally recognized standard.  A copy of the OHSMS andCertification to be provided along with the bid. If certification is notin place, details on how compliance will be ensured to the requirements ofcertification is to be provided.
3. The Bidder or his partner/JV shall haveemployed Min two (2) Engineers having at least 5 years of relevantexperience in providing calibration and validation , as well ascertification for custody transfer metering systems installed inPetrochemical Industry or Oil and Gas Industry. Note: Joint Venture withother capable service providers who meet the above requirements isacceptable, and in case of JV, documentary evidence in a form of contractor MOU., etc. is to be provided with the bid. The Bidder shall submit CV'sdemonstrating the Manpower skills relevant to the scope of work asmentioned in specifications during the bid submission. All requiredmanpower shall be based in Bahrain, with well-established facilities andsupport infrastructure.
4. Please provide details on the personnel withinyour organization that have NEBOSH  International or National GeneralCertificate in Occupational Health and Safety (level 3 or equivalent) asSafety Officer with previous work experience in the Oil & Gas andPetrochemical Industry. Documentary evidence shall be in the form of CVsplus relevant NEBOSH certificates [i.e. NEBOSH-Level-3 General Certificationin Occupational Health and Safety], and proof for permanent employmentshall be submitted along with bid to substantiate the above.

TENDER TITLE - ENG

PROVISION OF CALIBRATION AND CERTIFICATION OF CUSTODY TRANSFER METERING SYSTEMS INSTALLED IN REFINERY AND BMP 

SCOPE OF WORK

The scope of work comprises of providing calibration and certification services for all gas and Liquid Custody Transfer Metering Systems installed in Bapco (Refinery and BMP) as listed in the specifications and to ensure the systems are functioning within the allowable tolerance specified. The Engineer/s should identify areas for improvement and provide recommendations to modify/upgrade the system hardware or software as deemed necessary. Subsequent to the completion of the audit/certification, a summary report is to be issued by the Engineer followed by a comprehensive report detailing all findings/recommendations.

TENDER TITLE – ARABIC

توفير خدمات المعايرة والاعتماد لأنظمة قياس كمية التدفق لنقل الملكية المثبتة في المصفاة وال BMP

SCOPE OF WORK – ARABIC

يتشمل نطاق العمل على توفير خدمات المعايرة وإصدار الشهادات لجميع أنظمة قياس نقل الغاز والسوائل المثبتة في شركة بابكو (المصفاة وBMP) كما هو مدرج في المواصفات ولضمان عمل الأنظمة ضمن التسامح المسموح به المحدد. يجب على المهندس/المهندسين تحديد مجالات التحسين وتقديم توصيات لتعديل/ترقية أجهزة أو برامج النظام حسب الضرورة. بعد الانتهاء من عملية التدقيق/الاعتماد، يقوم المهندس بإصدار تقرير موجز يتبعه تقرير شامل يتضمن تفاصيل جميع النتائج/التوصيات.