تعتزم إدارة الخدمات العامة والمخازن المركزية شراء التالي:

The General Services and Central Stores Directorate would like to purchase the following:

1. CABLE, XLPE, 66KV, 800 MM²,SINGLE CORE, AL CONDUCTOR, PB SHEATH, HDPE JACKET, AS PER SPE.NO. N-116-R01 FOR NETWORK CABLE MAINTENANCE. 

2. CABLE, 300 MM2, BONDING CABLE, 1 CORE, CU CONDUCTOR, BLACK COLOUR, XLPE INSULATED, FOR EARTHING/LINK BOX-CONNECTION, AS PER SPE. NO.: N-046-R02, FOR NETWORK CABLE MAINTENANCE.

3. CABLE, 600/1000V, 300 MM2 , EARTHING CABLE, 1 CORE, CU CONDUCTOR, GREEN - YELLOW STRIPES, PVC INSULATED, AS PER SPE. NO.: N-048-R2, FOR NETWORK CABLE MAINTENANCE.

4. JOINT, STRAIGHT, PREMOLDED, FOR 66KV, XLPE, 1 CORE, 800 MM², AL CONDUCTOR, LEAD SHEATHED CABLE, AS PER - SPE. NO.: N-039-R02, FOR NETWORK CABLE MAINTENANCE. 

5. JOINT, TRANSITION, PREMOLDED, FOR 66KV, XPLE, 1 CORE, 550/800 MM², AL CONDUCTOR, LEAD SHEATHED CABLE, AS PER - SPE. NO.: N-040-R02,FOR NETWORK CABLE MAINTENANCE. 

6. BOX,LINK, SOLID BOND 3-1,WITHOUT S.V.L,66 KV,300SQ MM, STEEL, AS PER SPE. NO. N-118-R01.FOR NETWORK CABLE MAINTENANCE. 

7. BOX,LINK, SOLID BOND, 3-1,WITHOUT S.V.L., 66KV, 300MM², STEEL, WALL MOUNT TYPE AS PER SPE. NO: N-031-R01 FOR NETWORK CABLE MAINTENANCE. 

8. END, SEALING,GIS SIDE, FOR 66KV, XLPE, 1 CORE, 800 SQMM, AL CONDUCTOR, LEAD SHEATH CABLE, NON-IEC,AS PER - SPE. NO.: N-021-R03, FOR NETWORK CABLE MAINTENANCE. 

9. CABLE, 61 PAIR, 0.9 MM DIA, CU, CONDUCTOR, PE INSULATED, JELLY FILLED, STEEL WIRE ARMOURED, HDPE SHEATHED, OUTER- JACKET,FOR NETWORK CABLE MAINTENANCE AS PER SPE. N-095-R03. 

10. JOINT,PILOT,61 PAIR,0.9 MM2 COPPER CONDUCTOR,FOR NETWORK CABLE MAINTENANCE AS PER SPE.NO:N-096-R01. 

Approved Brands:

Item 1:

•         Brugg – Switzerland

•         TEBA – China

•         Jeddah Cables – KSA

•         RIYADH CABLES – KSA

•         SAUDI CABLE CO – KSA

•         DUCAB -U.A.E

Item 4&5:

•        Brugg – Switzerland

•        NKT – Germany/Sweden

•        Pfisterer - Switzerland

Item 8:

•        Brugg – Switzerland

•        NKT – Germany/Sweden

•        LS – South Korea

•        Pfisterer - Switzerland

Mandatory Requirements:

1.   Only offers from approved manufacturers will be evaluated.

2.   It is mandatory to state the country of origin of the Item.

3.   A minimum of (36 Months) warranty commencing from the date of receipt must be explicitly guaranteed by the supplier and clearly stated within the offer. This warranty must cover the total cost of restoration.

4.   Non-submission nor confirmation of the below mentioned technical requirements will render the offer null and void (rejected).  (Please refer to Section 1 – Scope of Work document) – Technical Requirements.

Item 1: Type Test Report, Technical Schedules, Detailed Drawings, FAT/Inspection Cost Inclusion, Defined Delivery Period, Cable Cut Length, Steel Cable Drums, Raw Material Source, Cable Dimensions for Joint/Termination Selection.

Item 2 & 3: Type Test Report, Technical Schedules, Detailed Drawings, FAT/Inspection Cost Inclusion, Defined Delivery Period, Cable Cut Length.

Item 4 & 5: Type Test Report, Technical Schedules, Detailed Drawings, Stress Relief Control (Joint Body), The Factory Test Inspection/Witnessing, Defined Delivery Period, Accessory Completeness, Mandatory Technical Training & Certification.

Item 6: Type Test Report, Technical Schedules, Lifting Keys, Detailed Drawings, The Factory Test Inspection/Witnessing, Defined Delivery Period, Accessory Completeness.

Item 7: Type Test Report, Technical Schedules, Detailed Drawings, The Factory Test Inspection/Witnessing, Defined Delivery Period, Accessory Completeness.

Item 8: Type Test Report, Technical Schedules, Detailed Drawings, Stress Relief Control (Joint Body), The Factory Test Inspection/Witnessing, Defined Delivery Period.

Item 9:   Type Test Report, Technical Schedules, Detailed Drawings, FAT/Inspection Cost Inclusion, Defined Delivery Period, Cable Cut Length.

Item 10: Technical Schedules, Detailed Drawings, Defined Delivery Period, Joints.